ISSN 2394-5125
 

Research Article 


Evaluation of Indigenously Developed One-Way Abrasive Flow Machine for Achievable Surface Roughness while Machining Mild Steel Specimen

Gururaja S, Dr. G V Naveen Prakash, Vismay K G, Shivashankar R, Arun C Dixit U, Rakshith, Gowda D S, Sanjay P.

Abstract
Abrasive Flow Finishing (AFF) is a non -traditional finishing process used to improve surface
finish or remove any surface impurities like recast layer for cast products, deburr the edges of components to
achieving micro or nano level finish. A silicon-based abrasive carrier is constrained through intricate geometries
of work by piston cylinder arrangement. The carrier media is a blend of hard abrasive particles, low hardness
polymer with proportionate measure of silicone oil to get proper blend similar to dough. The amount of each
quantity in the blend influences the removal rate and surface finish. Parameters such as operating pressure,
number of extrusions, size of abrasive particles and its quantity in the mixture; tooling and fixture designs have
significant effect surface quality and removal rate. This paper presents the development of indigenous one-way
AFF setup and study of surface quality or finish that can be achieved using the developed set-up.

Key words: Abrasive Flow Finishing, abrasive media, surface roughness


 
ARTICLE TOOLS
Abstract
PDF Fulltext
How to cite this articleHow to cite this article
Citation Tools
Related Records
 Articles by Gururaja S
Articles by Dr. G V Naveen Prakash
Articles by Vismay K G
Articles by Shivashankar R
Articles by Arun C Dixit U
Articles by Rakshith
Articles by Gowda D S
Articles by Sanjay P
on Google
on Google Scholar


How to Cite this Article
Pubmed Style

Gururaja S, Dr. G V Naveen Prakash, Vismay K G, Shivashankar R, Arun C Dixit U, Rakshith, Gowda D S, Sanjay P. Evaluation of Indigenously Developed One-Way Abrasive Flow Machine for Achievable Surface Roughness while Machining Mild Steel Specimen . JCR. 2020; 7(17): 1574-1580. doi:10.31838/jcr.07.17.199


Web Style

Gururaja S, Dr. G V Naveen Prakash, Vismay K G, Shivashankar R, Arun C Dixit U, Rakshith, Gowda D S, Sanjay P. Evaluation of Indigenously Developed One-Way Abrasive Flow Machine for Achievable Surface Roughness while Machining Mild Steel Specimen . http://www.jcreview.com/?mno=14355 [Access: August 18, 2021]. doi:10.31838/jcr.07.17.199


AMA (American Medical Association) Style

Gururaja S, Dr. G V Naveen Prakash, Vismay K G, Shivashankar R, Arun C Dixit U, Rakshith, Gowda D S, Sanjay P. Evaluation of Indigenously Developed One-Way Abrasive Flow Machine for Achievable Surface Roughness while Machining Mild Steel Specimen . JCR. 2020; 7(17): 1574-1580. doi:10.31838/jcr.07.17.199



Vancouver/ICMJE Style

Gururaja S, Dr. G V Naveen Prakash, Vismay K G, Shivashankar R, Arun C Dixit U, Rakshith, Gowda D S, Sanjay P. Evaluation of Indigenously Developed One-Way Abrasive Flow Machine for Achievable Surface Roughness while Machining Mild Steel Specimen . JCR. (2020), [cited August 18, 2021]; 7(17): 1574-1580. doi:10.31838/jcr.07.17.199



Harvard Style

Gururaja S, Dr. G V Naveen Prakash, Vismay K G, Shivashankar R, Arun C Dixit U, Rakshith, Gowda D S, Sanjay P (2020) Evaluation of Indigenously Developed One-Way Abrasive Flow Machine for Achievable Surface Roughness while Machining Mild Steel Specimen . JCR, 7 (17), 1574-1580. doi:10.31838/jcr.07.17.199



Turabian Style

Gururaja S, Dr. G V Naveen Prakash, Vismay K G, Shivashankar R, Arun C Dixit U, Rakshith, Gowda D S, Sanjay P. 2020. Evaluation of Indigenously Developed One-Way Abrasive Flow Machine for Achievable Surface Roughness while Machining Mild Steel Specimen . Journal of Critical Reviews, 7 (17), 1574-1580. doi:10.31838/jcr.07.17.199



Chicago Style

Gururaja S, Dr. G V Naveen Prakash, Vismay K G, Shivashankar R, Arun C Dixit U, Rakshith, Gowda D S, Sanjay P. "Evaluation of Indigenously Developed One-Way Abrasive Flow Machine for Achievable Surface Roughness while Machining Mild Steel Specimen ." Journal of Critical Reviews 7 (2020), 1574-1580. doi:10.31838/jcr.07.17.199



MLA (The Modern Language Association) Style

Gururaja S, Dr. G V Naveen Prakash, Vismay K G, Shivashankar R, Arun C Dixit U, Rakshith, Gowda D S, Sanjay P. "Evaluation of Indigenously Developed One-Way Abrasive Flow Machine for Achievable Surface Roughness while Machining Mild Steel Specimen ." Journal of Critical Reviews 7.17 (2020), 1574-1580. Print. doi:10.31838/jcr.07.17.199



APA (American Psychological Association) Style

Gururaja S, Dr. G V Naveen Prakash, Vismay K G, Shivashankar R, Arun C Dixit U, Rakshith, Gowda D S, Sanjay P (2020) Evaluation of Indigenously Developed One-Way Abrasive Flow Machine for Achievable Surface Roughness while Machining Mild Steel Specimen . Journal of Critical Reviews, 7 (17), 1574-1580. doi:10.31838/jcr.07.17.199